Heat Treatment Operator

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing company We are recruiting for an experienced VIM MELTER/ Furnace Operator to join a well-established Engineering & Manufacturing operation. This is a key role focused on delivering high-quality output while maintaining excellent safety and operational standards. Key Responsibilities: Operate VIM furnaces in line with safety and quality procedures Analyse bath samples and calculate alloy additions using ABS systems Check and prepare charge materials prior to furnace loading Supervise alloy weighing and control additions to meet specifications Maintain high housekeeping and plant standards Support production targets and carry out routine maintenance Requirements: Experience in VIM/ Melting operations Strong focus on safety, quality, and teamwork Good understanding of metallurgical processes What’s on Offer: Stable role within a reputable manufacturing environment Opportunity to develop skills and contribute to continuous improvement Competitive pay The role also involves a bonus of up to 10% Circa £5,000+ on top of the salary OTE £55K+

Manufacturing Operator Location: St. Albans, Hertfordshire Shift: Monday to Friday Days (with flexible night shifts) We are seeking a dedicated Manufacturing Operator to join our team. This role involves setting up and operating manufacturing equipment within a regulated, environmentally controlled environment. The successful candidate will ensure that products are manufactured to the highest quality standards in compliance with cGMP, health and safety, and company procedures, while supporting continuous improvement initiatives. Day-to-day of the role: Operate within strictly environmentally controlled areas, maintaining high standards of hygiene and strict adherence to cGMP, health and safety requirements, and associated documentation. Set up and operate automated and semi-automated manufacturing equipment in compliance with approved procedures and agreed production programmes. Ensure all equipment is used in accordance with maintenance, calibration, and validation requirements. Manufacture high-quality, high-value products right first time, in line with production schedules and quality standards. Accurately complete all required documentation in a timely manner. Carry out regular cleaning and basic maintenance of all equipment and fabric within the section in accordance with approved schedules. Actively support continuous improvement initiatives and contribute to meeting departmental and section objectives. Assist in coordinating section activities, liaising with other departments as required, and supporting the organisation of daily work operations. Support process and supervisory activities where required. Assist with on-the-job training to ensure designated tasks are performed effectively and compliantly. Contribute to the review and revision of Standard Operating Procedures (SOPs), Batch Production Records (BPRs), and associated documentation. Report any health and safety concerns or issues that could impact product quality or manufacturing compliance to the Supervisor or Manager. Adhere at all times to GMP, health and safety, hygiene, environmental control, and safe working practices. Ensure full compliance and adherence with all company policies, procedures, guidelines, and SOPs. Undertake other duties that are commensurate with the level and responsibilities of the role. Required Skills & Qualifications: Ideally will have an Engineering and/or HSE qualifications. Experience working in a manufacturing or production environment, within a regulated industry. Familiarity with automated or semi-automated equipment and controlled environments. Working knowledge of cGMP, hygiene, and health and safety requirements. Experience completing manufacturing documentation accurately and on time. Strong attention to detail with a focus on quality and right first-time production. Ability to follow procedures, work effectively as part of a team, and support continuous improvement. Good communication skills and a willingness to learn. Manual handling - ability to lift heavy materials (25kgs). How to apply: To apply for the Manufacturing Operator position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this position.

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company About the Role We are seeking a skilled and motivated Metallurgist to join our team. This is an exciting opportunity to play a key role in driving product quality improvements, supporting customers, and contributing to the development of new products within a high-performance engineering environment. Key Responsibilities Lead projects focused on improving product quality and reducing costs (e.g. Yield, Right First Time). Work directly with customers to define technical requirements and resolve complex issues. Collaborate closely with operations teams to troubleshoot and resolve internal technical challenges. Ensure all technical documentation is accurately maintained and updated to required standards. Establish, track, and report on KPIs for key process operations. Support the development and introduction of new products. Promote and adhere to a strong culture of quality, safety, and continuous improvement. Mentor and support graduate engineers and placement students. Travel (UK & international) as required to support customer visits and subcontract activities. Skills & Experience Required Essential: Bachelor’s Degree in Metallurgy, Materials Science, or a related discipline. Minimum 2–3 years’ experience in a relevant industrial environment. Experience within aerospace, oil & gas, or power generation sectors. Strong understanding of physical metallurgy, particularly steel and nickel-based alloys. Knowledge of OEM quality systems and customer requirements. Experience using improvement tools such as: RCCA (Root Cause Corrective Action) SPC (Statistical Process Control) Error Proofing / Poka-Yoke Problem-solving methodologies Flexible approach to working hours to support customer visits and audits when required. What We Offer Competitive salary and benefits package Opportunity to work on high-value engineering projects Career progression within a growing, technically focused organisation Supportive team environment with a strong focus on development and mentoring

Reed Engineering & Manufacturing are working with a leading manufacturing/heavy engineering business looking to appoint a Production Controller to play a pivotal role in driving operational performance, improving delivery reliability, and ensuring production runs smoothly from start to finish. This is a fantastic opportunity for someone with planning or production experience who wants to step into a highly visible role with real impact across operations, supply chain, and customer delivery. 🔧 What you’ll be doing: Owning production planning and scheduling, ensuring orders are delivered on time and in full Providing accurate lead times and balancing demand against capacity Driving on-time delivery (OTD) and identifying risks before they impact customers Managing material flow using pull systems, buffers, and inventory control Coordinating closely with operations, suppliers, and logistics teams Overseeing subcontractor performance and ensuring supply continuity Handling customer reschedules and delivery updates professionally and proactively Monitoring performance vs plan and taking action to keep production on track Contributing to S&OP and capacity planning discussions ✅ What we’re looking for: Experience in production planning, scheduling, or manufacturing operations Strong understanding of how a factory environment runs (metals/heavy engineering/manufacturing/steel experience is a bonus) Confident with Excel and planning systems Highly organised with the ability to prioritise in a fast-moving manufacturing environment Strong communicator—able to influence and build relationships across teams A proactive mindset with a focus on problem-solving and continuous improvement The position also includes a bonus of up to £5,400

Skilled Fine Limit Sheet Metal Worker Location: Romford, Essex Job Type: Full-time Salary: Competitive (Dependent on Experience) A leading precision engineering company is seeking an experienced Fine Limit Sheet Metal Worker to join their growing team. This is an excellent opportunity for a highly skilled individual who takes pride in producing complex, high-precision components to the highest industry standards. Day-to-Day Responsibilities: Manufacture fine limit sheet metal components to tight tolerances. Work from engineering drawings, specifications, and templates. Form, bend, cut, and assemble sheet metal parts. Carry out fitting, drilling, countersinking, and riveting. Use hand tools, machines, and measuring equipment with precision. Inspect finished components to ensure they meet quality standards. Support continuous improvement initiatives and maintain a safe, organised workspace. Required Skills & Qualifications: Proven experience as a Fine Limit Sheet Metal Worker. Strong ability to read and interpret technical drawings and schematics. Experience working to tight tolerances within precision environments. Skilled in sheet metal fabrication techniques and assembly processes. High level of attention to detail and commitment to quality. Ability to work both independently and as part of a skilled team. Aerospace experience is advantageous but not essential. Benefits: Competitive salary tailored to experience. Opportunity to work on high-spec, complex engineering projects. Ongoing training and development opportunities. Supportive, skilled team environment. Long-term career progression within a growing business. How to Apply: If you’re a skilled sheet metal worker looking to take the next step in your career, we’d love to hear from you. Apply now or get in touch for a confidential chat.

Skilled Fine Limit Sheet Metal Worker Location: Romford, Essex Job Type: Full-time Salary: Competitive (Dependent on Experience) A leading precision engineering company is seeking an experienced Fine Limit Sheet Metal Worker to join their growing team. This is an excellent opportunity for a highly skilled individual who takes pride in producing complex, high-precision components to the highest industry standards. Day-to-Day Responsibilities: Manufacture fine limit sheet metal components to tight tolerances. Work from engineering drawings, specifications, and templates. Form, bend, cut, and assemble sheet metal parts. Carry out fitting, drilling, countersinking, and riveting. Use hand tools, machines, and measuring equipment with precision. Inspect finished components to ensure they meet quality standards. Support continuous improvement initiatives and maintain a safe, organised workspace. Required Skills & Qualifications: Proven experience as a Fine Limit Sheet Metal Worker. Strong ability to read and interpret technical drawings and schematics. Experience working to tight tolerances within precision environments. Skilled in sheet metal fabrication techniques and assembly processes. High level of attention to detail and commitment to quality. Ability to work both independently and as part of a skilled team. Aerospace experience is advantageous but not essential. Benefits: Competitive salary tailored to experience. Opportunity to work on high-spec, complex engineering projects. Ongoing training and development opportunities. Supportive, skilled team environment. Long-term career progression within a growing business. How to Apply: If you’re a skilled sheet metal worker looking to take the next step in your career, we’d love to hear from you. Apply now or get in touch for a confidential chat.

Night Shift Quality Control Inspector Location: Romford, Essex Job Type: Full-time, Night Shift Salary: Dependent on experiece We are seeking a dedicated Night Shift Quality Control Inspector to join our clients' team. This role is crucial for ensuring the control and compliance of products within the Quality Control inspection department in accordance with current manufacturing and Quality Assurance procedures, engineering drawings, and customer requirements. Day-to-day of the role: Verify the conformity of parts, assemblies, and sub-assemblies according to engineering drawings, the quality management system, and specific customer requirements. Ensure comprehensive completion and auditable traceability of inspection records. Support Production with the timely verification of batch first off. Create and compile First Article Inspection Reports (FAIRs). Conduct inspection duties across all areas of the manufacturing and supply chain process as required. Identify and report non-conformance as per the Company procedure. Ensure compliance with Quality Assurance and HSE policies and procedures at all times. Process and return documentation for parts dispatched for external processing. Highlight and escalate quality concerns to production management and quality engineering. Support problem-solving initiatives to drive root cause analysis and preventive action. Participate in New Product Introduction planning meetings and advise on inspection methodology. Engage in Continuous Improvement initiatives. Required Skills & Qualifications: Ability to interpret and understand technical data including customer drawings, specifications, and FAIR documentation. Experience with goods inward inspection of finished products/components. Familiarity with aerospace customers and suppliers is preferred. Proficiency in inspecting precision components ensuring adherence to drawing requirements. Skilled in setting and using a variety of direct inspection gauges and measuring equipment. Experience with Co-ordinate Measuring Machine (CMM) operation. Knowledge of Sheet Metal/Fabricated parts inspection. HND qualified or equivalent, with good knowledge of both Imperial and metric geometrical definitions. Strong inspection, testing, and examination techniques. Excellent numerical skills and the ability to make accurate measurement calculations. Effective communication skills, both verbally and in writing. Ability to work independently or as part of a team, managing tight deadlines while maintaining quality standards. To apply for the Night Shift Quality Control Inspector position, please submit your CV and a cover letter detailing your relevant experience and why you are interested in this role.

Night Shift Quality Control Inspector Location: Romford, Essex Job Type: Full-time, Night Shift Salary: Dependent on experiece We are seeking a dedicated Night Shift Quality Control Inspector to join our clients' team. This role is crucial for ensuring the control and compliance of products within the Quality Control inspection department in accordance with current manufacturing and Quality Assurance procedures, engineering drawings, and customer requirements. Day-to-day of the role: Verify the conformity of parts, assemblies, and sub-assemblies according to engineering drawings, the quality management system, and specific customer requirements. Ensure comprehensive completion and auditable traceability of inspection records. Support Production with the timely verification of batch first off. Create and compile First Article Inspection Reports (FAIRs). Conduct inspection duties across all areas of the manufacturing and supply chain process as required. Identify and report non-conformance as per the Company procedure. Ensure compliance with Quality Assurance and HSE policies and procedures at all times. Process and return documentation for parts dispatched for external processing. Highlight and escalate quality concerns to production management and quality engineering. Support problem-solving initiatives to drive root cause analysis and preventive action. Participate in New Product Introduction planning meetings and advise on inspection methodology. Engage in Continuous Improvement initiatives. Required Skills & Qualifications: Ability to interpret and understand technical data including customer drawings, specifications, and FAIR documentation. Experience with goods inward inspection of finished products/components. Familiarity with aerospace customers and suppliers is preferred. Proficiency in inspecting precision components ensuring adherence to drawing requirements. Skilled in setting and using a variety of direct inspection gauges and measuring equipment. Experience with Co-ordinate Measuring Machine (CMM) operation. Knowledge of Sheet Metal/Fabricated parts inspection. HND qualified or equivalent, with good knowledge of both Imperial and metric geometrical definitions. Strong inspection, testing, and examination techniques. Excellent numerical skills and the ability to make accurate measurement calculations. Effective communication skills, both verbally and in writing. Ability to work independently or as part of a team, managing tight deadlines while maintaining quality standards. To apply for the Night Shift Quality Control Inspector position, please submit your CV and a cover letter detailing your relevant experience and why you are interested in this role.

Manufacturing Engineer and CNC Programmer Location: Romford, Essex Job Type: Full-time Salary: Dependent on experience We are seeking a self-motivated Manufacturing Engineer and CNC Programmer with expertise in precision manufacturing and aerospace practices. This role is crucial for generating CNC Part Programmes for 3, 4, and 5 Axis Machine Tools, creating new product processes, and improving manufacturing efficiency. Day-to-day of the role: Prepare CNC Programmes from planned processes, including tool definition, setup sheets, and tooling plans. Prove Programmes into production and own the configuration of all supporting process elements such as production routings, tooling, gauges, test equipment, work holding, and CNC programmes. Determine materials and tools needed to achieve manufacturing goals according to product specifications at the lowest cost. Make improvements to current operations to enhance efficiency. Develop processes and methods to meet manufacturing requirements ensuring the lowest cost and highest quality. Develop transparent cost structures and identify potential reduction initiatives. Support the development of documentation to enhance process control. Collaborate with the New Product Introduction (NPI) team. Ensure that all engineering processes are controlled by the quality management system. Conduct ongoing research into emerging manufacturing and production technology to complement current and future business strategies. Required Skills & Qualifications: Proficient use of CAD/CAM Software to generate 3D Models and production of CNC Programmes (GibbsCAM preferred). Highly capable in machine tool and cutting tool specification and application. Understanding of and ability to interpret technical drawings and specifications. Previous use and experience of SOLIDWORKS. Knowledge of precision engineering processes including general machining (milling and turning). Knowledge of Aerospace requirements particularly operating to AS9100. Ability to present and communicate at all levels including the customer where appropriate. Proven experience of working to schedules and the ability to plan personal workloads. Education: Educated in Engineering (Mechanical, Manufacturing, Aerospace) to degree / HNC / HND level or equivalent. Experience in a Manufacturing / Production role within a medium / large precision engineering organisation, ideally within the aerospace sector. Qualified/trained in relevant CAD/CAM Software. Personal Characteristics: Strong problem-solving skills with demonstrated ability to implement containment quickly. Awareness of stakeholder engagement / involvement. Strong communication skills across all levels. An ability to prioritise and simplify. Analytical, integrity, accountability and ownership. Desire to win, results-oriented, self-motivated and self-managing, customer-focused. Additional Skills: Previous use and experience of GibbsCAM (or similar). Ability to methodically measure, analyse and present capital opportunities to promote breakthrough unconventional manufacturing / production techniques. Project Management skills. To apply for the Manufacturing Engineer and CNC Programmer position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this position.

Manufacturing Engineer and CNC Programmer Location: Romford, Essex Job Type: Full-time Salary: Dependent on experience We are seeking a self-motivated Manufacturing Engineer and CNC Programmer with expertise in precision manufacturing and aerospace practices. This role is crucial for generating CNC Part Programmes for 3, 4, and 5 Axis Machine Tools, creating new product processes, and improving manufacturing efficiency. Day-to-day of the role: Prepare CNC Programmes from planned processes, including tool definition, setup sheets, and tooling plans. Prove Programmes into production and own the configuration of all supporting process elements such as production routings, tooling, gauges, test equipment, work holding, and CNC programmes. Determine materials and tools needed to achieve manufacturing goals according to product specifications at the lowest cost. Make improvements to current operations to enhance efficiency. Develop processes and methods to meet manufacturing requirements ensuring the lowest cost and highest quality. Develop transparent cost structures and identify potential reduction initiatives. Support the development of documentation to enhance process control. Collaborate with the New Product Introduction (NPI) team. Ensure that all engineering processes are controlled by the quality management system. Conduct ongoing research into emerging manufacturing and production technology to complement current and future business strategies. Required Skills & Qualifications: Proficient use of CAD/CAM Software to generate 3D Models and production of CNC Programmes (GibbsCAM preferred). Highly capable in machine tool and cutting tool specification and application. Understanding of and ability to interpret technical drawings and specifications. Previous use and experience of SOLIDWORKS. Knowledge of precision engineering processes including general machining (milling and turning). Knowledge of Aerospace requirements particularly operating to AS9100. Ability to present and communicate at all levels including the customer where appropriate. Proven experience of working to schedules and the ability to plan personal workloads. Education: Educated in Engineering (Mechanical, Manufacturing, Aerospace) to degree / HNC / HND level or equivalent. Experience in a Manufacturing / Production role within a medium / large precision engineering organisation, ideally within the aerospace sector. Qualified/trained in relevant CAD/CAM Software. Personal Characteristics: Strong problem-solving skills with demonstrated ability to implement containment quickly. Awareness of stakeholder engagement / involvement. Strong communication skills across all levels. An ability to prioritise and simplify. Analytical, integrity, accountability and ownership. Desire to win, results-oriented, self-motivated and self-managing, customer-focused. Additional Skills: Previous use and experience of GibbsCAM (or similar). Ability to methodically measure, analyse and present capital opportunities to promote breakthrough unconventional manufacturing / production techniques. Project Management skills. To apply for the Manufacturing Engineer and CNC Programmer position, please submit your CV and cover letter detailing your relevant experience and why you are interested in this position.